Return to study ST002282 main page
MB Sample ID: SA218501
| Local Sample ID: | tube11_jmt2A |
| Subject ID: | SU002368 |
| Subject Type: | Plant |
| Subject Species: | Arabidopsis thaliana |
| Taxonomy ID: | 3702 |
| Age Or Age Range: | 2 weeks |
| Species Group: | Plants |
Select appropriate tab below to view additional metadata details:
Combined analysis:
| Analysis ID | AN003727 |
|---|---|
| Analysis type | MS |
| Chromatography type | GC |
| Chromatography system | Agilent 7890B |
| Column | Agilent DB-FFAP |
| MS Type | EI |
| MS instrument type | Single quadrupole |
| MS instrument name | Agilent 5977B |
| Ion Mode | UNSPECIFIED |
| Units | ion intensity peak area |
Chromatography:
| Chromatography ID: | CH002760 |
| Chromatography Summary: | Sample preparation and injection were performed using the fully automated Gerstel MPS-2 autosampler and Gerstel MAESTRO software. Volatile compounds were adsorbed on a Tenax TA tube. A thermal desorption unit (TDU) was used to thermally desorb the volatiles in splitless mode at 230°C for 10 min. To ensure that the volatiles released from the TDU were quantitatively trapped, a cooled injection system-programmed temperature vaporizer (CIS-PTV) was used. The CIS was heated from 80°C to 230°C at a rate of 12°C/s with the split valve closed during sample injection into the GC inlet. Analyses of volatile compounds were performed on an Agilent 7890B GC coupled to a 5977B quadruple mass spectrometer. Separation of compounds was performed on a DB-FFAP column (60 m x 250 µm x 0.25 µm, Agilent Technologies, Middleburg, OI, USA). Helium was used as the carrier gas at a flow rate of 1.9 ml/min, and solvent vent mode was used. The inlet temperature was 250°C. The oven program was as follows: initial temperature of 50°C held for 1 min, increased to 230°C at the rate of 10°C/min and held for 20 min. The temperature of the ion source and transfer line was 250°C. |
| Instrument Name: | Agilent 7890B |
| Column Name: | Agilent DB-FFAP |
| Chromatography Type: | GC |
